Languages: English   Currencies:  

£1,032.00 (Incl VAT)

Hydro-pro 10 ABS pool heat pump for pools up to 45m³

Hydro-Pro 10 10KW swimming pool heat pump for pools up to 45m³

Hydro-Pro Heat pump ABS 230V black type 10 horizontal

Features:

  • High efficiency coefficient up to 6.2
  • “All seasons” model works until -5°C
  • Cabinet made of ABS
  • Full flow
  • Easy digital temperature control with LCD display
  • All functions are microprocessor controlled
  • Quiet running with low sound rotary compressor, low noise fan
  • R410A gas for an environmentally friendly operation
  • Automatic defrost
  • Titanium heat exchanger resistant to salt and chlorine
  • Including drain and flow switch
  • Winter cover included
  • Maximum pool volume depending on average outside temperature

Type: 10
Motor Power: 1.48 kW
Max. pool vol.: 45 m³
Nominal volume flow rate: 2,8 m³/h

Easy installation
The unit is intelligently designed and remarkably compact for easy installation. The heat pump has to
be installed on a by-pass after the filtration pump. For all 2010 models and onwards, it is no longer
necessary to tune your heat pump with a by-pass, due to our new full-flow heat exchanger.

 

   Would you prefer us to

 Install your System for you?

 

 


 

Advanced control
The integrated microprocessor monitors all the sensors, and controls the device without any
intervention of the user. Electronic display and control with easy operation is standard.
The integrated flow switch will sense the water flow and automatically start the heater when the pool
pump starts and stops when the pump shuts off.

Running quietly
The use of a highly efficient, low sound rotary or scroll compressor, a low noise fan and an oversized
heat exchanger, makes the unit extremely quiet in operation. For example, the Hydro-Pro 7 at 10
metres distance gives out only 40 db(A).

Hydro-Pro heat pumps can save you up to 80% in operating costs.
Whether you just want to extend your swimming season or swim all season
in a warm comfortable pool, the Hydro-Pro heat pump can pay for
itself in just a few years with the operation costs savings.

Highly efficient and economical
Energy is collected from the air outside and transferred to the pool water.
For each kW consumed by the Hydro-Pro heat pump, 4 to 6 kW are returned to the pool.

   Hydro-Pro heat pumps can save you up to 80% in operating costs.
Whether you just want to extend your swimming season or swim all season
   in a warm comfortable pool, the Hydro-Pro heat pump can pay for
        itself in just a few years with the operation costs savings.

Use
The Hydro-Pro heat pump must be installed outside. It will heat the pool from April to October, and will
even work efficiently with outside temperatures as low as -5°C for the Hydro-Pro Premium  range and -5°C
for the Hydro-Pro range. Our Hydro-Pro Premium heat pumps have as an extra feature, a cooling mode, which allows the water to be cooled down by the Hydro-Pro Premium heat pump as well.

Environment
- Hydro-Pro heat pumps are less harmful to the environment because 80% of the energy produced is
collected from the outside air and therefore is purely natural.
- The gas used, has no harmful effect on the ozone layer.
- Our Hydro-Pro heat pumps are very energy efficient. Our Hydro-Pro+ range even reach a COP value of 6.

Constructed for durability and longevity
Using advanced and high quality materials such as PVC, stainless steel and titanium (for the heat
exchanger) means it is resistant to corrosion by chlorine or salt. The heat exchanger is oversized to
improve efficiency.

How does it work?
Hydro-Pro heat pumps utilise the sun’s free heat by collecting and absorbing energy from the outside
air. This energy is then transferred to the pool water. Your existing pool pump circulates the water
through the heater and warms the pool. The unit contains a fan that draws in outside air and directs it
over the surface of the EVAPORATOR (energy collector).
The liquid refrigerant within the EVAPORATOR coil absorbs the heat from the outside air and the
refrigerant becomes a gas. The warm gas passes through the compressor where it is compressed to
form a very hot gas, which then passes through the CONDENSOR (water heat exchanger).
It is here that the heat exchange occurs as the hot gas gives up the heat to the cooler swimming pool
water circulating through the coil.
The pool water becomes warmer and the hot gas cools down as it flows through the CONDENSOR coil.
It returns to its liquid form and after passing through the expansion valve, the whole process begins again.

 NOTE**  This heat pump sizing is based on the asumption that your pool has good thermal insulation and completely in the ground, all external pipework is well insulated, a good thermal cover (400 micron or more), low water table, pipework run from pump house to pool less than 5 metres.

If you have any doubts or have any questions please contact us before making your purchase.

Reviews

Manufacturers
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
Manufacturer Info
Hydro-Pro
Other products
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Google Buzz Share on Digg
Advanced Search    |    Reviews    |    Create an Account    |    Log In   |   Privacy Notice    |   sitemap  
Paypal