Hydro-Pro Inverter Z Type to suit pool volumes 10 - 180m³
The Inverter heat pump offers the ability to vary the heating capacity to suit weather conditions. Using the new automated Power/Smart/Silent modes, the compressor and fan speeds can be varied to reduce noise levels & energy consumption by up to 50%
Intelligence with 3 modes
The Hydro-Pro Inverter has 3 modes, so the user can choose the mode that best fits the needs for any moment.
The ’Powerful’ mode is ideal for the beginning of the pool season, with 100% output it increases the temperature of the pool in a very short period.
In the ’Smart’ mode, the Hydro-Pro Inverter regulates a constant water temperature with 75-100% output which ensures maximum swimming comfort.
Save up to 80% on your energy bills thanks to the incredible 13 COP this unit can achieve.
Low-cost heating throughout the season can be yours at market-leading prices and with its stylish, stainless-steel finish, the Hydro-Pro Inverter is ideally suited for any location.
- New R32 gas (R410A for 3 phase models)
- The heat pump Inverter provides the opportunity to automatically adjust heating capacities to suit weather conditions
- By using Power/Smart/Silent modes you can reduce energy use
- Efficient COP up to 13
- “All seasons” model works until -5°C
- Cabinet made of ABS
- Full flow
- Easy digital temperature control with LCD display
- All functions are microprocessor controlled
- Quiet running with low noise rotary compressor & low noise variable speed fan
- Soft start, no voltage peaks
- Automatic defrost
- Titanium heat exchanger resistant to salt and chlorine
- Including drain and flow switch
- Winter cover included
- Maximum pool volume depending on environmental conditions
- Two year warranty
Would you prefer us to
Install your System for you?
Titanium heat exchanger resistant to salt and chlorine Including drain and flow switch
Maximum pool volume depending on environmental conditions
The Inverter heat pump offers the ability to vary the heating capacity to suit weather conditions. Using the new automated Power/Smart/Silent modes, the compressor and fan speeds can be varied to reduce noise levels & energy consumption by up to 30%
How does it work?
Heat pumps utilise the sun’s free heat by collecting and absorbing energy from the outside air. This energy is then transferred to the pool water. Your existing pool pump circulates the water through the heater and warms the pool. The unit contains a fan that draws in outside air and directs it over the surface of the EVAPORATOR (energy collector). The liquid refrigerant within the EVAPORATOR coil absorbs the heat from the outside air and the refrigerant becomes a gas. Warm gas passes through the compressor where it is compressed to form a very hot gas, which then passes through the condenser (water heat exchanger). It is here that the heat exchange occurs as the hot gas gives up the heat to the cooler swimming pool water circulating through the coil. The pool water becomes warmer and the hot gas is cooling down as it flows through the condenser coil, returns to its liquid form and, after passing through the expansion valve, the whole process begins again.
We offer a full survey and pool heat pump installation service by our qualified Heat Pump Installers who are also able to offer full inspections and problem solving on present heat pump installations.
The areas that we cover are Sussex, Surrey and Hampshire
Contact us for more information on 01903 367565 or email us